This page was exported from New Braindump2go Exam Dumps
[
https://www.eccouncildumps.com
]
Export date: Fri Mar 29 4:47:39 2024 / +0000 GMT
2020/Sep Latest Braindump2go 300-610 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 300-610 Real Exam Questions! QUESTION 38 A. VTEP Answer: CD QUESTION 39 A. adjacency server to track the overlay membership Answer: C QUESTION 40 A. A maximum of eight OOB IP address can be configure to access the CIMC on the server Answer: B QUESTION 41 A. HA Answer: AE QUESTION 42 A. vPC+ Answer: D QUESTION 43 A. network speed Answer: C QUESTION 44 A. reduction in application performance Answer: D QUESTION 45 A. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode Answer: B QUESTION 46 A. NPIV mode QUESTION 47 A. WWPN Answer: CD QUESTION 48 A. FCoE protocol Answer: C QUESTION 49 QUESTION 51 A. M-Series modules support FcoE. Answer: CE QUESTION 52 A. Only the active Fabric Interconnect forwards data traffic Answer: CE QUESTION 53 A. The Cisco UCS fabric Interconnect must be in switch mode. Answer: D QUESTION 54 A. Connect the VDCs to an external Layer 3 device. Answer: AD QUESTION 55 A. Cisco UCS Manager creates two separate fabric port channels. Answer: A 1.2020 Latest Braindump2go 300-610 Exam Dumps (PDF & VCE) Free Share: 2.2020 Latest Braindump2go 300-610 PDF and 300-610 VCE Dumps Free Share: 3.2020 Free Braindump2go 300-610 PDF Download: Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!
You plan to configure LISP between two data centers. Which two LISP components most be configured? (Choose two.)
B. the site identifier
C. a map resolver
D. a map server
E. VNI
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s- book/irl-cfg-lisp.html
You must design an OTV implementation that supports packets fragmentation.
Which option do you use?
B. OTV headers defined to allow core to hash traffic
C. Cisco ASR 1000 Series Aggregation Services Router that has Advanced IP Services
D. MTU size of 9216 bytes on all the join interfaces
Which statement accurately describe the allocation of IP pool for out of Band management of cisco?
B. The management IP address used to access CIMC on a server can be out of band address the inter connect via the fabric uplink port
C. A maximum of Sixteen OOB IP address can be configure to access the CIMC on the server
D. The management IP address used to access CIMC on a server can be out of band address the inter connect via the Management port
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)
B. VSS
C. FT
D. VDP
E. DRS
Explanation:
https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/HyperFlex_Stretched_Cluster/3_5/ b_HyperFlex_Systems_Stretched_Cluster_Guide_3_5.pdf
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
B. E-Trunk
C. SAN port channel
D. LACP port channel
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
B. GPU support
C. storage capacity
D. processor count
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?
B. distance limitations
C. specific backup requirements
D. potential data loss
Explanation:
https://www.evidian.com/products/high-availability-software-for-application-clustering/synchronous-replication-vs-asynchronous-replication/
Where does Cisco UCS handle Fibre Channel traffic failover?
B. on the host, by using multipathing software
C. in the hardware on the Cisco UCS VIC 12xx adapter or later
D. in the hardware on any Cisco UCS VIC adapter
Explanation:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/whitepaper_c11-701962.html
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
B. FC end-host mode
C. NPV mode
D. FC switching mode
Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)
B. EUI
C. IQN
D. WWN
E. OUI
Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/cli_3_3_1/ciscsi.html
What influences the number of ISLs that are required between Cisco MDS Series switches?
B. type of storage
C. end-to-end oversubscription ratio
D. N Port virtualization
Explanation:
https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer-directors/white-paper-c11-729697.html
Drag and Drop Question
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
QUESTION 50
Drag and Drop Question
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
You plan to implement Cisco Nexus 7000 Series switches in a data center. Which two factors must be considered for the implementation? (Choose two.)
B. In storage VDCs, you can have only storage traffic.
C. Each F-Series module that runs FCoE requires an FCoE license.
D. F1-Series and F2-Series modules cannot exist in the same VDC.
E. F3-Series modules lack support for FEX.
Which two statements accurately describe a Cisco UCS Fabric Interconnect cluster? (Choose two )
B. The Fabric Interconnect cluster uses a Cisco UCS B-Senes Blade Server chassis to forward data when the L1-L2 links are down
C. The Fabric Interconnect cluster uses a virtual IP address for management connections
D. The Fabric Interconnect uses L1-L2 links to forward data when the primary Fabric Interconnect uplinks are down.
E. primary Fabric Inter connect node conies up after a failure, the node compares the Cisco UCS system database version to Fabric Interconnect
Which statement accurately describes the configuration requirements for disjoint Layer 2 networks on Cisco UCS?
B. The VLAN IDs must overlap in both Layer 2 domains.
C. All of the uplinks most be in one port channel to keep all of the ports active.
D. The Cisco UCS Fabric Interconnect must be in end-host motto.
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
B. Cross-connect the ports between the VDCs.
C. Create VRF-aware software infrastructure interfaces.
D. Create a policy map in the default VDC that routes traffic between the VDCs.
E. Create interfaces in the VDC that can be accessed by another VDC.
Refer to the exhibit. A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
B. Cisco UCS Manager creates a single fabric port channel.
C. The port channel is disabled until an administrator enables it manually.
D. Each uplink that connects an IOM is configured as a discrete link.
Resources From:
https://www.braindump2go.com/300-610.html
https://drive.google.com/drive/folders/1-_mRnMoWZa3gT8x6ZLE-tDSAB0k08ME_?usp=sharing
https://www.braindump2go.com/free-online-pdf/300-835-Dumps(38-48).pdf
https://www.braindump2go.com/free-online-pdf/300-835-PDF(16-26).pdf
https://www.braindump2go.com/free-online-pdf/300-835-PDF-Dumps(49-59).pdf
https://www.braindump2go.com/free-online-pdf/300-835-VCE(27-37).pdf
https://www.braindump2go.com/free-online-pdf/300-835-VCE-Dumps(1-15).pdf
Post date: 2020-09-24 03:17:45
Post date GMT: 2020-09-24 03:17:45
Post modified date: 2020-09-24 03:17:45
Post modified date GMT: 2020-09-24 03:17:45
Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com