Your company has a private cloud that contains a System Center 2012 Orchestrator infrastructure. You are creating a runbook named runbook1.
You need to ensure that the workflow starts when a file is added to a folder. From which category should you add an activity? To answer, select the appropriate category in the answer area.
A runbook can only have one starting point. A starting point is an activity that automatically runs when the runbook is started. Each activity in the runbook runs after the previous activity in the workflow is complete.
If a runbook starts with any activity other than a monitor, the runbook begins processing and attempts to run to completion. If the runbook starts with a monitor activity, the monitor loads and
waits for the trigger condition. Once the condition is met, a runbook instance is created to run the remaining activities in the runbook. The monitor continues to run and wait another occurrence of the trigger condition. Runbooks that start with monitors continue to run until you stop them from the Runbook Designer or Orchestration console.
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. You plan to deploy a single-tier service to the private cloud. The service is configured to use Network Load Balancing (NLB). You need to create a Hardware Profile for the virtual machines that will be added to the service template. The solution must ensure that the virtual machines will use Windows Network Load Balancing. Which settings should you configure in the Hardware Profile? To answer, configure the four appropriate settings in the dialog box in the answer area.
Your company has a private cloud that contains two Active Directory forests named contoso.com and adatum.com. The contoso.com network and the adatum.com network are separated by a firewall.
No trusts exist between the forests.
You deploy System Center 2012 Operations Manager to adatum.com.
You install agents on 100 servers in both forests.
You need to ensure that you can monitor all 100 servers. The solution must minimize the traffic between the two networks.
What should you install? (Each correct answer presents part of the solution. Choose all that apply.)
A. A server certificate on the gateway server in contoso.com
B. A gateway server in adatum.com
C. A server certificate on the gateway server in adatum.com
D. Client certificates on all of the servers in adatum.com
E. A gateway server in contoso.com
F. A server certificate on the management server in adatum.com
G. Client certificates on all of the servers in contoso.com
You need to implement a solution for the email attachments.
Both organizations exchange root CA certificates and install the certificates in the relevant stores.
You duplicate the Enrollment Agent certificate template and generate a certificate based on the new template.
Which additional two actions should you perform? Each Answer presents part of the solution.
A. Request cross-certification authority certificates.
B. Create Capolicy.inf files.
C. Request subordinate CA certificates.
D. Create Policy.inf files.
Your network contains an Active Directory domain. The domain contains 10 file servers. The file servers connect to a Fibre Channel SAN.
You plan to implement 20 Hyper-V hosts in a failover cluster.
The Hyper-V hosts will not have host bus adapters (HBAs).
You need to recommend a solution for the planned implementation that meets the following requirements:
The virtual machines must support live migration.
The virtual hard disks (VHDs) must be stored on the file servers.
Which two technologies achieve the goal? Each correct answer presents a complete solution.
A. Cluster Shared Volume (CSV)
B. An NFS share
C. Storage pools
D. SMB 3.0 shares
Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. The forest functional level is Windows 2000. The contoso.com domain contains domain controllers that run either Windows Server 2008 or Windows Server 2008 R2. The domain functional level is Windows Server 2008. The fabrikam.com domain contains domain controllers that run either Windows 2000 Server or Windows Server 2003. The domain functional level is Windows 2000 native. The contoso.com domain contains a member server named Server1 that runs Windows Server 2012 R2. You need to add Server1 as a new domain controller in the contoso.com domain. What should you do first?
A. Raise the functional level of the contoso.com domain to Windows Server 2008 R2.
B. Upgrade the domain controllers that run Windows Server 2008 to Windows Server 2008 R2.
C. Raise the functional level of the fabrikam.com domain to Windows Server 2003.
D. Decommission the domain controllers that run Windows 2000.
E. Raise the forest functional level to Windows Server 2003.
D. Server 2003 is the minimum Domain Functional level for any domain in the forest Windows Server 2012 R2 requires a Windows Server 2003 forest functional level. That is, before you can add a domain controller that runs Windows Server 2012 R2 to an existing Active Directory forest, the forest functional level must be Windows Server 2003 or higher.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DNS Server server role installed. You need to configure Server1 to resolve queries for single-label DNS names. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Run the Set-DNSServerGlobalNameZone cmdlet.
B. Modify the DNS suffix search list setting.
C. Modify the Primary DNS Suffix Devolution setting.
D. Create a zone named “.”.
E. Create a zone named GlobalNames.
F. Run the Set-DNSServerRootHint cmdlet.
You administer a Microsoft SQL Server 2012 database. The database contains a Product table created by using the following definition:
You need to ensure that the minimum amount of disk space is used to store the data in the Product table. What should you do?
A. Convert all indexes to Column Store indexes.
B. Implement Unicode Compression.
C. Implement row-level compression.
D. Implement page-level compression.
http://msdn.microsoft.com/en-us/library/cc280449.aspx http://msdn.microsoft.com/en-us/library/cc280464.aspx http://msdn.microsoft.com/en-us/library/cc280576.aspx http://msdn.microsoft.com/en-us/library/ee240835.aspx
You administer a Microsoft SQL Server 2012 database. You provide temporary securityadmin access to User1 to the database server. You need to know if User1 adds logins to securityadmin. Which server-level audit action group should you use?
This event is raised when the SQL Server service state is modified. Equivalent to the Audit Server Starts and Stops Event Class.
This event is raised when there is an impersonation within server scope, such as EXECUTE AS <login>.
Equivalent to the Audit Server Principal Impersonation Event Class.
SUCCESSFUL_LOGIN_GROUP Indicates that a principal has successfully logged in to SQL Server. Events in this class are raised by new connections or by connections that are reused from a connection pool. Equivalent to the Audit Login Event Class.
This event is raised whenever a login is added or removed from a fixed server role. This event is raised for the sp_addsrvrolemember and sp_dropsrvrolemember stored procedures. Equivalent to the Audit Add Login to Server Role Event Class.
You administer a Microsoft SQL Server 2012 database. The database has a table named Customers owned by UserA and another table named Orders owned by UserB.
You also have a stored procedure named GetCustomerOrderInfo owned by UserB. GetCustomerOrderInfo selects data from both tables.
You create a new user named UserC.
You need to ensure that UserC can call the GetCustomerOrderInfo stored procedure.
You also need to assign only the minimum required permissions to UserC.
Which permission or permissions should you assign to UserC? Choose all that apply.
A. The Select permission on Customers
B. The Execute permission on GetCustomerOrderInfo
C. The Take Ownership permission on Customers
D. The Control permission on GetCustomerOrderInfo
E. The Take Ownership permission on Orders
F. The Select permission on Orders
The question seems to be missing something. Or the original answer is incorrect. I’ve changed it to what I believe to be the correct answer. The original answer included “The Select permission on Orders.”, but due to ownership chaining, you would only need to give Execute permissions to UserC to access the Orders table since UserB is the owner.
(BF) – need to test this
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as a standalone certification authority (CA). You install a second server named Server2. You install the Online Responder role service on Server2. You need to ensure that Server1 can issue an Online Certificate Status Protocol (OCSP) Response Signing certificate to Server2. What should you do?
A. On Server1, run the certutil.exe command and specify the -setreg parameter.
B. On Server2, run the certutil.exe command and specify the -policy parameter.
C. On Server1, configure Security for the OCSP Response Signing certificate template.
D. On Server2, configure Issuance Requirements for the OCSP Response Signing certificate template.
You have a server named Server1 that runs Windows Server 2012 R2.
From Server Manager, you install the Active Directory Certificate Services server role on
A domain administrator named Admin1 logs on to Server1.
When Admin1 runs the Certification Authority console, Admin1 receive the following error message.
You need to ensure that when Admin1 opens the Certification Authority console on Server1, the error message does not appear.
What should you do?
A. Run the Install-AdcsCertificationAuthority cmdlet.
B. Install the Active Directory Certificate Services (AD CS) tools.
C. Modify the PATH system variable.
D. Add Admin1 to the Cert Publishers group.
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. All domain controllers run Windows Server 2012 R2 and are configured as DNS servers. All DNS zones are Active Directory-integrated. Active Directory Recycle Bin is enabled.
You need to modify the amount of time deleted objects are retained in the Active Directory Recycle Bin.
Which naming context should you use?
To answer, select the appropriate naming context in the answer area.
Your network contains an Active Directory domain named adatum.com. The domain contains a domain controller named DC1. On DC1, you create a new volume named E.
You restart DC1 in Directory Service Restore Mode.
You open ntdsutil.exe and you set NTDS as the active instance.
You need to move the Active Directory logs to E:\NTDS\.
Which Ntdsutil context should you use?
B. Configurable Settings
C. Partition management
How to Move Log Files
Use the move logs to command to move the directory service log files to another folder. For the new settings to take effect, restart the computer after you move the log files.
To move the log files, follow these steps:
Click Start, click Run, type ntdsutil in the Open box, and then press ENTER. At the Ntdsutil command prompt, type files, and then press ENTER. At the file maintenance command prompt, type move logs to new location (where new location is an existing folder that you have created for this purpose), and then press ENTER.
Type quit, and then press ENTER.
Restart the computer.
http://technet.microsoft.com/en-us/library/cc753343(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc755229(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc730970(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc732530(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc753900(v=ws.10).aspx
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. You pre-create a read-only domain controller (P.QDC) account named RODC1. You export the settings of RODC1 to a file named File1.txt. You need to promote RODC1 by using File1.txt.
Which tool should you use?
A. The Dcpromo command
B. The Install-WindowsFeature cmdlet
C. The Install-ADDSDomainController cmdlet
D. The Add-WindowsFeature cmdlet
E. The Dism command
If you have experience creating read-only domain controllers, you will discover that the installation wizard has the same graphical interface as seen when using the older Active Directory Users and Computers snap-in from Windows Server 2008 and uses the same code, which includes exporting the configuration in the unattend file format used by the obsolete dcpromo.”
“The Summary dialog enables you to confirm your settings. This is the last opportunity to stop the installation before the wizard creates the staged account. Click Next when you are ready to create the staged RODC computer account. Click Export Settings to save an answer file in the obsolete dcpromo unattend file format.”
You are evaluating the deployment of a multi-site Hyper-V failover cluster in the Miami office and the Seattle office to host App2.
You need to identify which changes must be made to support the use of the multi-site cluster. Which changes should you identify?
A. Purchase a storage solution that replicates the virtual machines.
Configure all of the virtual machines to use dynamic memory.
B. Upgrade the WAN link between the Miami and Seattle offices.
Purchase a storage solution that replicates the virtual machines.
C. Configure all of the virtual machines to use dynamic memory.
Implement Distributed File System (DFS) Replication and store the virtual machine files in a replicated folder.
D. Implement Distributed File System (DFS) Replication and store the virtual machine files in a replicated folder.
Upgrade the WAN link between the Miami and Seattle offices.
You must have a Fast WAN for Multisite clustering and DFS doesn’t work for multisite Hyper-V Clusters
Your network contains two servers named Server1 and Server2 that run Windows Server 2012. Server1 and Server2 are connected to a Fibre Channel Storage Area Network (SAN). Server1 and Server2 are members of a failover cluster named Cluster1.
You plan to host the clustered File Server role on the nodes in Cluster1. Cluster1 will store application databases in shared folders.
You need to implement a storage solution for Cluster1. The solution must minimize the amount of time the shared folders are unavailable during a failover.
What should you implement? More than one answer choice may achieve the goal. Select the BEST answer.
A. An iSCSI Target Server cluster role in Cluster1
B. The Multi Path I/O (MPIO) feature on Server1 and Server2
C. A Virtual Fibre Channel SAN on Server1 and Server2
D. A Cluster Shared Volume (CSV) in Cluster1
Your network contains the following roles and applications:
– Microsoft SQL Server 2012
– Distributed File System (DFS) Replication
– Active Directory Domain Services (AD DS)
– Active Directory Rights Management Services (AD RMS)
– Active Directory Lightweight Directory Services (AD LDS)
You plan to deploy Active Directory Federation Services (AD FS). You need to identify which deployed services or applications can be used as attribute stores for the planned AD FS deployment. What should you identify? (Each correct answer presents a complete solution. Choose all that apply.)
B. AD RMS
C. Microsoft SQL Server 2012
D. AD LDS
E. AD DS
You are planning the deployment of System Center 2012 Virtual Machine Manager (VMM). You need to identify which additional System Center 2012 product is required to meet the visualization requirements. What should you include in the recommendation?
A. Service Manager
B. Operations Manager
C. Configuration Manager
D. App Controller
Your network contains the following:
– 20 Hyper-V hosts
– 100 virtual machines
– 2,000 client computers
You need to recommend an update infrastructure design to meet the following requirements:
– Deploy updates to of the all virtual machines and the client computers from a single console.
– Generate reports that contain a list of the applied updates.
What should you recommend?
More than one answer choice may achieve the goal. Select the BEST answer.
A. One Windows Server update Services (WSUS) server integrated with Microsoft System Center 2012 Configuration Manager and a second WSUS server that is integrated with Microsoft System Center 2012 Virtual Machine Manager (VMM)
B. One Windows Server Update Services (WSUS) server integrated with Microsoft System Center 2012 Configuration Manager and Microsoft System Center 2012 Virtual Machine Manager (VMM)
C. One Windows Server Update Services (WSUS) server integrated with Microsoft System Center 2012 Virtual Machine Manager (VMM)
D. One Windows Server Update Services (WSUS) server integrated with Microsoft System Center 2012 Configuration Manager, a second WSUS server integrated with Microsoft System Center 2012 Virtual Machine Manager (VMM), and a third standalone WSUS server.